Printing line, hard line changed to soft line

Technical Parameters: wLocation way: Optical locationwAlignment way: Search for the edge/Mark point wCamera qty: four/eight (high precision) wPrinting precision: ≤± 50μm/≤± 20μm (search for Mark point precision)wPrinting speed: ≤350mm/secwDamage rate ≤0.02% wActivation ≥99% Project IllustrationwThe former cells entering way, changed from moving way to rolling conveying mechanism. wThe moving mechanism of input and output changed to conveyor conveying with higher efficiency of conv

Cell Mark point test

Technical Parameters：wProduct dimension : 400mm×300mm×700mmw (length, width, height)wAlignment method: Search the edge/Mark pointwPower: 220V single-phase electricwCycle Time： 1swOutput ≥3600pcswTest overall accuracy: ±3umwUptime≥99.9%wMissing detection rate ≤0.1%wMisjudge rage ≤2%Project Illustration：wCell demission measuring: Through four camerasat the edge, locate the whole silicon slice and calculate the length of four sides, and then get the length and width of the silicon

furnace burning tower modification

Technical Parameters :w ±2℃ Temp. precision: ± 2℃w Temp: 1100℃w Temp area: one. w Heating method: heating wire + hot wind w Organics output qty: one（1*∮159） w Organics output emission: 600 cubic meters/h Project Illustration :w The original funnel direct output mechanism, the organic unsolved. No fireproof turn-off device. w Add exhaust gas burning, cooling, leaking oil collection and fire resisting damper device. w The specific configuration is according to on site model and custo

After furnace receiving mechanism

Technical Parameters :w Product Name: after furnace receiving mechanismw 尺寸：750mm（L）x200mm(W)x550mm(H)w Dimension: 750mm（L）x200mm(W)x550mm(H) w Control system: PLC system w Output: track transfer, speed of sucking disc receiving ≤1.2S w Damage rate ≤0.02% w Activation ≥99% Project Illustration w When the furnace stops to deal with issues, needs to stop the machine to deal with it. But the silicon slice can’t remain in the furnace for a long time. Needs to take out timely. w

Tester 9BB modifying

Technical Parameters • Transfer track request • Belt speed adjustable, track pitch adjustable, stable transferring• Probe module • Meet the on site technology request, pitch adjustable, stable test. • Output• Track transfer, probe test speed request Damage rate• Damage rate ≤0.02% • Activation rate• Activation rate ≥99% Project Illustration w Due to the difference technology, needs five grids and different multi-grids to switch. w Change the fixed mount of the probe. The s

166 cell printing line modifying III

166 cell printing line modifying IV

Technical Parametersw The inside width of the material box is adjustable, compatible with 158-180 cells. w Simple mechanism. Easy to install and adjust. w Damage rate ≤0.02% w Activation ≥99% Project Illustration w The original material box can only take 156 cell and can’t be compatible with 166-180 cells. w The inside width of the new model material box is adjustable through adjusting the screws. Compatible with 158-180 cells. w 166 involves the modification of transporting device and de